options: [-cs|-Cs|-c-] [-s] [-i] inputfile [-i anotherinputfile] [...]

-i file

Select a file to monitor. You can have multiple -i file parameters. You only need to add -i file in front of a filename if the filename starts with a dash ('-').

-I file

Same as -i file but add the output to the previous window (so the output is merged).

-iw file interval

-Iw file interval Like '-i'/'-I' but expects the parameter to be a wildcard and the second(!) an interval. Initially MultiTail will start monitoring the first file with the most recent modification time. Every interval it will check if any new files were created (or modified) and start tailing that one. *Don't forget* to put quotation marks around the filename as otherwhise the shell will try to substite them!

-l command

Command to execute in a window. Parameter is the command. Do not forget to use "'s if the external command needs parameter! (e.g. -l "ping host").

-L command

Same as -l but add the output to the previous window (so the output is merged).

-j

Read from stdin (can be used only once as there is only 1 stdin).

-J

Same as -j but add the output to the previous window (so the output is merged).

--mergeall

Merge all of the following files into the same window (see '--no-mergeall').

--no-mergeall

Stop merging all files into one window (see '--mergeall');

--no-repeat

When the same line is repeated, it will be suppressed while printing a "Last message repeated x times" message.

--mark-interval x

Print every 'x' seconds a mark-line when nothing else was printed.

-q i path

Check path for new files with interval 'i', all in new windows. One can enter paths here understood by the shell. E.g. "/tmp/*". Note: do not forget to add quotes around the pathname to prevent the shell from parsing it!

-Q i path

Like -q: but merge them all in one window.

--new-only

For -q/-Q: only create windows for files created after MultiTail was started.

--closeidle x

Close windows when more then 'x' seconds no new data was processed.

-a x

Write the output also to file 'x' (like 'tee') AFTER it was filtered by MultiTail.

-A x

Write the output also to file 'x' (like 'tee') BEFORE it was filtered by MultiTail.

-g x

Send the output also to command 'x' AFTER it was filtered by MultiTail.

-G x

Send the output also to command 'x' BEFORE it was filtered by MultiTail.

-S

Prepend merged output with subwindow-number.

-t title

-t title

With this switch, "title" is displayed in the statusline

With this switch, "title" is displayed in the statusline instead of the filename or commandline.

-n number_of_lines

Number of lines to tail initially. The default depends on the size of the terminal-window.

-r interval

Restart the command (started with -l/-L) after it has exited. With interval you can set how long to sleep before restarting.

-R interval

Restarts a command like -r only this one shows the difference in output compared to the previous run.

-rc / -Rc interval

Like -r / -R but clears the window before each iteration.

-h

The help.

-f

Follow the following filename, not the descriptor.

-fr filter

Use the predefined filter(s) from the configfile.

-e

Use the next regular expression on the following file.

-ex

Use regular expression on the following file and execute the command when it matches. The command gets as commandline parameter the whole matching line.

-eX

Like '-ex' but only give the matching substring as parameter. This requires a regular expression with '(' and ')'.

-ec

Use regular expression on the following file and display the matches.

-eC

Use regular expression on the following file but display everything and display the matches inverted.

-E

Use the next regular expression on the following files.

-v

Negate the next regular expression.

-s x

Splits the screen vertically in 'x' columns.

-sw x

At what position to split the screen. e.g. '-sw 20,40,,10' (=4 columns)

-sn x

How many windows per column for vertical split (use with -s or -sw). e.g. '-sn 3,,2'.

-wh x

Sets the height of a window (advisory: if it won't fit, the height is adjusted).

-cS scheme

Show the next given file using the colorscheme selected with 'scheme' (as defined in multitail.conf).

-CS scheme

Show all following files using the colorscheme selected with 'scheme' (as defined in multitail.conf).

-csn

Extra switch for the following switches; do not use reverse (inverted) colors.

-cs

Show the next given file in colors (syslog).

-c

Show the next given file in colors.

-Cs

Show all following files in color (through syslog-scheme).

-C

Show all following files in color.

-Cf field_index delimiter

Show all following files in color depending on field selected with field_index. Fields are delimited by the defined delimiter.

-cf field_index delimiter

Show the next file in color depending on field selected with field_index. Fields are delimited by the defined delimiter.

-ci color

Use a specific color. Usefull when merging multiple outputs.

-cT terminalmode

Interpret terminal codes. Only ANSI supported at this time.

-c-

Do NOT colorize the following file.

-C-

Do NOT colorize the following files.

-ts

Add a timestamp to each line (format is configurable in multitail.conf).

-Z color

Specify the color-attributes for the markerline.

-T

A timestamp will be placed in the markerline.

-d

Do NOT update statusline.

-D

Do not display a statusline at all.

-du

Put the statusline above the data window.

-z

Do not display "window closed" windows.

-u

Set screen updateinterval (for slow links).

-m nlines

Set buffersize Set nlines to 0 (zero) if you want no limits on the buffering.

-mb x

Set scrollback buffer size (in bytes, use xKB/MB/GB).

-M nlines

Set the buffersize on ALL following files.

-p x [y]

Set linewrap: a = print everything including linewrap. l = just show everything starting at the left until the rightside of the window is reached. r = show everything starting from the right of the line. s = show everything starting with the processname. S = show everything starting after the processname. o = show everything starting at offset 'y'.

-P x [y]

Like -p but for all following windows.

-ke x

Strip parts of the input using regular expression 'x'.

-kr x y

Strip parts of the input starting at offset x and ending (not including!) offset y.

-kc x y

Strip parts of the input: strip column 'y' with delimiter 'x'.

-ks x

Use editscheme 'x' from configfile.

-w

Do not use colors.

-b n

Sets the TAB-width.

--config filename

Load the configuration from given filename.

-x

Set xterm-title: %f will be replaced with the last changed

Set xterm-title: %f will be replaced with the last changed file, %h with the hostname, %l with the load of the system, %m with "New mail!" when the current user has new mail, %u with the current effective user, %t timestamp of last changed file, %% with a %

-o configfile-item

Proces a configurationfile item via the commandline in case you cannot edit the default configfile.

--cont

Reconnect lines with a '' at the end.

--mark-interval interval

When nothing comes in, print a '---mark---' line every 'interval' seconds.

--mark-change

When multiple files are merged an multitail switches between two windows, print a markerline with the filename.

--no-mark-change

Do NOT print the markerline when the file changes (overrides the configfile).

--label text

Put "text" in front of each line. Usefull when merging multiple files and/or commands.

--retry

Keep trying to open the following file if it is inaccessible.

--retry-all

Like --retry but for all following files.

-cv x

Use conversion scheme 'x' (see multitail.conf).

--basename

Only display the filename (and not the path) in the statusline.

-F file

Use 'file' as configfile (instead of default configfile).

--no-load-global-config

Do NOT load the global configfile.

--beep-interval x

Let the terminal beep for every x-th line processed. Press 'i' in the main menu to see how many times it beeped.

--bi x

Like '--beep-interval' but only for current (sub-)window. Statistics on the number of beeps can be found in the statistics for this (sub-)window. Press 't' in the main menu.

-H

Show heartbeat (to keep your sessions alive).

-V

Show the version and exit.

multitail /var/log/apache/access_log logfile -i -filestartingwithdatsh

This creates three windows. One with the contents of /var/log/apache/access_log, one with the contents of logfile and so on.

multitail -R 2 -l dqnetstat -tdq

This runs netstat every 2 seconds and then shows what has changed since the previous run. That way one can see new connections being made and closed connections fading away.

multitail logfile -l dqping 192.168.1.3dq

This creates two windows. One with the contents of logfile, one with with the output of 'ping 192.168.1.3'.

multitail /var/log/apache/access_log -I /var/log/apache/error_log

This creates one window with the contents of /var/log/apache/access_log merged with the contents of /var/log/apache/error_log.

multitail -M 0 /var/log/apache/access_log -I /var/log/apache/error_log

Same as previous example. This example will store all logged entries in a buffer so that you can later on browse through them (by pressing ' b ').

Well, except for the resizing of your terminal window. The program might crash when doing such things. Upgrading the ncurses library to at least version 5.3 might help in that case.